You are here: Home » Media Converters » Fibridge Media Converters

Fibridge Media Converters

Garry Sholl | Feb 20, 2010 | 0 comments

Gigabit Media Converter
Support 1000Base-T, 1000Base-LX&1000Base-SX,
Multimode and single mode optional, double strand and single strand optional

Digital Video Optical

	1 Channel
	1 – 2 Channels
	3 – 4 Channels
	5 – 8 Channels
	9 – 16 Channel
	1 – 64 Channels
	4U/6U 12-slot Chassis

Fiber Media Converter

	Unmanaged Fiber MC
	Managed Fiber MC
	Giga Media Converter
	2.5U 16-slot Chassis
	4 Copper Pors Fiber MC
TDM Over IP
	TDM over IP

Protocol Converter

	E1 to 10Base-T
	4E1 to 10/100Base-T
	8E1 to 10/100Base-T
	E1 to V.35
	4U 12-slot Chassis

PDH Multiplexer

	4E1 Plus 2*10/100Mbps
	4/8E1 Redundant Optic
	16E1 Redundant Optic
	6U 12-slot Chassis

SDH EOS MSAP

STM-1 SDH Series

Network Switch

	5 copper port
	4 Copper & 1 Optic

G.SHDSL

E1/V.35/Ethernet DSL

CWDM Products

	Media Converter
	PDH Multiplexer
	Video Optical

Video Encoder/Decoder

MPEG2 Video

CWDM Products

	FC Fiber Optic Connector
	LC Fiber Optic Connector
	MT RJ Fiber Optic Connector
	SC Fiber Optic Connector
	ST Fiber Optic Connector

Adapter

	FC Adapter
	FC-SC Converter
	SC Adapter
	ST Adapter

Attenuator

In-line Attenuator

Coupler

	Dual Window Single Mode Wideband
	Single Window Single Mode Wavelength Flattened
	Standard Single Mode

WDM MUX

TFF WDM–13101550nm

Optical Transceiver

	Transceiver–1X9 SC, MMF
	Transceiver–1X9 SC SMF
	Transceiver–CWDM

Gigabit Media Converter Support 1000Base-T, 1000Base-LX&1000Base-SX, Multimode and single mode optional, double strand and single strand optional

Application

Overview
FB-10/100MMC Series Media Converter is designed to meet the needs for massive fiber network deployment and able to extend a legacy copper based Ethernet network via fiber cable to a maximum distance up to 120Km. It is fully compliant with IEEE802.3z standards; built-in Switch ASIC has turned the device function more like a 2 ports switch than a traditional converter. User can get all switching benefits such like traffic segmentation, frames checking & error filtering.
The installation and operation procedures of the device are simple and straightforward. Operation status can be monitored through a set of Diagnostic LED located in the front panel.
Features

Support 1000Base-T, 1000Base-LX&1000Base-SX
Convert 1000bps Ethernet copper port to optical port
Fiber type: Multimode and single mode optional, double strand and single strand optional
Up to 80Km distance on single-mode fiber
Allow transmitting and receiving VLAN data packet
Two types optional: stand-alone unit and Modular Chassis
Internal power supply, including AC220V or DC-48V

Specifications

Ethernet Copper Port
Data rate: 10M, 100M, 1000Mbps
Auto-negotiate on Full/Half duplex topology
Connectors: RJ-45 Connector
Auto MDI/MDI-X
Optical Port
Support 1000Base-LX&1000Base-SX
Connectors: SC/ST/FC single mode or Multimode
Single Strand and Double Strand fiber port optional
Single-mode wavelength: 1310nm and 1550nm
Multimode wavelength: 850nm and 1310nm
Single-mode wavelength: 1310nm and 1550nm
Device Size
Standalone : 110mm*140mm*40mm
Chassis : 19inch*250mm*125mm
Power
Voltage: 100~240VAC or -48VDC
Power Consumption: <3 Watts
Environment
Temperature: 0-50oC
Humidity: 0-90%(non-condensing)

Typical Order Information
F1-M72CA Multimode, 1310nm, SC, standalone, 220VAC power supply
F1-M71CD Multimode, 850nm, SC, standalone, -48VDC power supply
F1-S4042CA Single mode, Distance: 40km, 1310nm, SC, standalone, 220VAC power supply
F1-S4042TM Single mode, Distance: 40km, 1310nm, ST, Module

For more order models, please contact us.

10/100Mbps 10/100/1000Mbps Fiber Media Converter

Fibridge Ethernet Media Converter translates transmission signals from a twisted-pair 10/100/ 1000Base-TX cable to 100/1000Base-FX fiber optic cable. It has SNMP based intelligent network management, by that user can monitor and configure the copper port and optical port of center chassis and remote standalone easily. Besides, user can control the bandwidth rate limiting as N*32Kbps. The management system enables network managers and network operators quickly isolate problems without visiting multiple wiring closets, avoiding expensive downtime.

* Fully compatible with IEEE802.3?IEEE802.3u?IEEE802.3z standards
* Up to 120km distance on single mode optical port
* Up to 1916 bytes package forwarded
* Optical port support Dual-strand, single-strand and CWDM etc
* Ethernet copper port supports 10/100/1000Mbps speed and half/full duplex mode Auto-negotiate
* Ethernet copper port supports MDI/MDI-X auto sensing
* Standalones and Chassis Modules Optional
* Support Console, WEB and SNMP management
* View & configure the working status of local chassis and remote standalone device, including connection status, speed, half/full duplex mode, port status
* Set the speed limitation from 0Mbps to 70Mbps by step of 32Kbps
* Support remote loop back function
* Support online firmware upgraded